Home
Help
Contact Us
Submit a Ticket
Your Name
*
Your Email
*
Phone Number
*
Issue Type
*
Issue Type
Complain
inquiry
Subject
*
Product Category
*
Product Category...
Wood Coatings
Brand
*
Brand...
Product Code...
*
Product Code...
Batch Number
*
Pack Size
Product Quanitity
Address
Description Type
*
Description Type...
Other
Brush marks
Pigment settling
Color difference
Gloss Difference
Babble in Surface after application
Gloss reduce
Cloudy
Product Solidified
Make Rubbery layer top of can
Make Rubbery layer top of cane
Pinhole
Babble in Surface after application/Gloss difference
Not Scratchers and stain resistant
Scratches
Layer on the product
After applying the pimples/grain flopping
The goods settle down and solidify after applying
Brown Sealer Over Sanding
1)Brown Sealer Over Sanding, 2)Brown Sealer Didn't fill MDF fiber ,3)Walnut color doesn't Match
Product Show high gloss more than 25%
Pimples showing after applying
Product Congestion
Pimples and Grain flapping after applying
The glass is high look like 30% glass
Pimples showing after applying .there's also showing white layer. and lots off powder.
Sketch Coming, Hardener Low,Finishing not smooth
After Mixing product have so much foam and bubble.Foam stay long time
Sealer does not stick to wood.If sending it goes up.Technical support is needed
Finishing Not good. Many grains are seen.
JU40:8020 - Theres some layer showing in this product
JU40:8020 - Theres some layer showing in this product, JT40:4090- Weight is showing less from its own package
Showing Pimples after applying and Showing white layer also
Courier Damages
Courier Damages - 1) CTT30:3090-20-(3pcs), 2)CTT30:3090-5(1Pcs),3)CTU30:7040-20-(1Pcs),4)CTU30:7044-20-(1Pcs),5)BWB-17-2KG-(1Pcs),6)TH801-1-(2Pcs)
Showing Pimples after applying
Clotted,less in weight
It's getting dry after applying
Showing excess gloss after applying
Pimples showing after applying.
All is showing red and became jelly in the intact packet .
After applying Top Coat
After applying Top Coat its getting bubble and
After applying Top Coat its getting bubble and raindrop
Solidfied
COVERAGE LOW
SLOW DRIYING
SOLID
Top coat cracking after application
After can open some rubber jelly find
On the pack is wriiten Brown sealer, But the inside is top coat
On The pack is written Brown sealer, But the inside is top coat
Viscosity low,Take more colour, Colour wastage 25% approxy
Viscosity low, Take more colour, Colour wastage 25% approxy
Viscosity low, Take more colour, Colour wastage 25% approx.
After receiving the product, dealer open the intake can and sow the product hard and something like jelly on the top
Low viscosity and colour power accumulate at the bottom
Low density and low coverage
Freely scratch
Thin milky layer is found in the brown sealer after opening the tin
After applying marking like pinholes are found
Thick layer on top of can after opening, Material wastage almost 25kg
Less in weight
Thick layer on top of can after opening, Material wastage almost 2kg
Thick and hard layer on top weight around 1.6Kg
Thick and hard layer on top, weight around 1.6Kg
Clear sealer scratches after application, After top coat application also coating scratches by finger nail
Sealer accumulated on top around 2kg per drum
UV top coat 30% apply then dust come
After applying comes the sand and dust
It's swelling after giving furnishing coat
Completely hard
Bubble come
More thin and colour is not perfect
The Product like a jelly on top
Almost 30% low coverage
Almost 30% low coverage then chinees and Malaysian colour
40% golss look like 90% gloss
Pheel off
Flaking
Finishing not good. Many bubble seen. Customer wants change
-
-
Colour quality is bad
Clotted in cane
After applying pimples are found
Colour different
-
-
-
The product congeals like a jelly at the top and the drum became hard on the side 1-2 days after opening
The product is damaged
-
-
-
Product applied and after dried pinhole is visible. First bubble pinhole
Dry time slow and sanding problem
Colour is change and gloss more
-
-
Colour not mach
Colour not match
Product Viscosity Very Low
Product is thin
Drying time slow and sanding problem
Technical issues
-
-
After open the can found a peace like milk
Gloss loke 30%
10% top coat gloss like 30%
After open can found a peel like milk
Look like rubber on top
Colour do not match with previous one
No Coverage
The production come stiff, No coverage,
Thick layer on top of the can after opening
Can damege
Hard - 1) CTT30:3090-20-(3pcs), 2)CTT30:3090-5(1Pcs),3)CTU30:7040-20-(1Pcs),4)CTU30:7044-20-(1Pcs),5)BWB-17-2KG-(1Pcs),6)TH801-1-(2Pcs)
Other
*
Attachment(s)
Team
Submit
View my Tickets